Quick answer
To evaluate exchange listings for a token, ignore the count and read the quality tier. Open the Markets tab on CoinGecko and group the listings into three tiers. Tier 1 — Coinbase, Kraken, Binance, OKX, Bybit, Gemini — means the token has passed at least one external compliance and listing review. Tier 2 — KuCoin, MEXC, Gate.io, Crypto.com, Bitget — means lower-bar listings that still carry some reputational overhead but less due diligence. Tier 3 — Uniswap, PancakeSwap, SushiSwap, and other decentralised exchanges — means anyone can list, including the developers themselves. A token on one Tier 1 exchange is structurally safer than the same token on five Tier 3s. DEX-only listings are not automatically bad — most legitimate early-stage tokens start there — but they remove an entire layer of external review. StableHub's Rug Risk Score v1 uses CoinGecko's full exchange list, treating five or more listings as a precondition for the LOW grade. Run the contract through StableHub and read which specific exchanges fired against the verdict.
Not financial advice. A Tier 1 exchange listing is not an endorsement. StableHub tools are for informational purposes only.
Why exchange tier matters more than count
Five listings on five obscure DEX aggregators is the same listing five times — the same liquidity, reshared. One listing on Coinbase is a different kind of signal: a regulated US exchange has accepted reputational and legal risk by carrying the token. That review is not exhaustive, but it filters out the obvious failure modes. Exchanges that have done their own diligence are an externally-sourced opinion you can layer on top of the on-chain check.
This page is the deep dive on Signal 4 of the five-signal framework. The wider context sits in the Complete Guide to Crypto Token Safety; this guide walks through how to read the Markets tab and what each tier actually filters for.
The three-tier model
| Tier | Examples | What a listing here filters for |
|---|---|---|
| Tier 1 — regulated CEX | Coinbase, Kraken, Binance, OKX, Bybit, Gemini, Bitstamp | KYC/AML compliance review, basic contract audit, legal team sign-off, ongoing market surveillance. Outright scams are rare. |
| Tier 2 — mid-bar CEX | KuCoin, MEXC, Gate.io, Crypto.com, Bitget, HTX, BingX | Lighter listing review — usually contract verification, basic team check, and liquidity provision agreement. Reputational overhead exists; due-diligence depth varies. |
| Tier 3 — DEX | Uniswap V2/V3, PancakeSwap, SushiSwap, Curve, Raydium, Jupiter | Anyone can list. No review of any kind. Liquidity provider could be the developer with no external check. |
Three behaviours follow from this:
- A single Tier 1 listing is worth more on the safety signal than ten Tier 3 listings.
- A cluster of Tier 2 listings with no Tier 1 is a common pattern for tokens that are not scams but have not passed regulated-exchange review — common for non-US projects, memecoins, and early-stage protocols.
- DEX-only is the default state for any new token. Treat it as neutral on this signal, but remember that the safety bar on every other signal is correspondingly higher.
Step 1 — Open the Markets tab on CoinGecko
Search the token on CoinGecko. Click into the listing. Click the Markets tab (sometimes labelled "Markets" or "Exchanges"). You will see a table of every venue where the token trades, with columns for Exchange, Pair, Price, Spread, +2% Depth, -2% Depth, 24h Volume, and Trust Score.
Step 2 — Sort by 24-hour volume and read the top entries
Sort descending on 24h Volume. The top 3–5 rows are doing most of the actual trading. A token whose top-3 exchanges include Coinbase or Kraken is in a different position than a token whose top-3 are all DEXes you do not recognise. Read the exchange name in column 1 and map it to a tier from the table above.
Step 3 — Read the Trust Score column
CoinGecko publishes a Trust Score (green / yellow / red) per market that reflects its assessment of order-book quality, reported volume credibility, and exchange standing. It is not perfect — Trust Score does not catch every wash-trading venue — but the green/yellow/red distinction is a useful first filter for sketchy listings.
| Trust Score | What it implies |
|---|---|
| Green | CoinGecko's confidence in reported volume is high. Order book and spreads look credible. |
| Yellow | Mixed signals — reported volume may be partly inflated, or order-book depth thin. |
| Red | Reported volume is unreliable. Treat as noise rather than a genuine venue. |
A token whose visible volume is concentrated on red-rated markets has less real liquidity than the headline 24h volume suggests. This is the same wash-trading concern raised in the liquidity guide, viewed from the exchange side rather than the pool side.
Step 4 — Apply the StableHub listing rule
StableHub's Rug Risk Score v1 uses the CoinGecko exchanges array as Signal 4. The fixed rule in the system prompt is:
- Five or more exchanges is a precondition for the LOW grade. Below five, the engine is biased toward MEDIUM regardless of other signals.
- Top-5 exchange names are passed to the verdict layer as a separate array, so the model can weight tier quality alongside count.
- Zero exchanges — usually because CoinGecko has not yet indexed the token — contributes directly to the HIGH grade. This is intentional conservative bias.
The full scoring rule set is published on the methodology page with version numbering and a changelog. The engine does not currently distinguish tier explicitly — that is one of the v2 enhancements alongside holder concentration and pool inspection.
The StableHub Exchange Quality Tiering Framework
StableHub Exchange Quality Tiering Framework: Exchange listings are read as a quality signal rather than a count. Tier 1 listings (Coinbase, Kraken, Binance, OKX, Bybit, Gemini, Bitstamp) carry meaningful external compliance review and outright scams in this tier are rare. Tier 2 listings (KuCoin, MEXC, Gate.io, Crypto.com, Bitget, HTX, BingX) carry lighter review but still some reputational overhead. Tier 3 listings (Uniswap, PancakeSwap, SushiSwap, and other decentralised exchanges) carry no external review — anyone can list. A single Tier 1 listing is structurally safer than five Tier 3 listings. DEX-only is the default state for legitimate early-stage tokens, neutral on this signal but raising the safety bar on the remaining four signals. StableHub's Rug Risk Score v1 treats five or more listings of any tier as a precondition for the LOW grade, with explicit tier weighting scheduled for the v2 release.
What a Tier 1 listing does and does not tell you
A Tier 1 listing tells you:
- The contract has been reviewed by at least one exchange's compliance team and was not rejected.
- The project team has provided some form of legal documentation, KYC, and disclosure.
- The exchange judged the listing reputational-risk-acceptable.
- An external party will continue to monitor the market for manipulation.
It does not tell you:
- The token is a good investment.
- The price will hold — many Tier-1-listed tokens have fallen 90%+ from listing.
- The exchange endorses the project.
- The token cannot be delisted later if circumstances change.
The signal is a meaningful lower bound on legitimacy. It is not a ceiling on the work you still need to do on the other four signals: liquidity, holder concentration, contract verification, and token age.
When DEX-only is not a red flag
Three contexts where DEX-only is normal rather than concerning:
- Genuinely early-stage projects. A token that launched three weeks ago will not yet have CEX listings even if the team is credible. The Rug Risk Score's MEDIUM-minimum rule for tokens under 30 days exists to express exactly this.
- US-restricted projects. Some legitimate tokens are explicitly geo-blocked from US exchanges for regulatory reasons. The same token may list on a Tier 2 international CEX without ever touching Coinbase or Kraken.
- Decentralisation-by-design projects. Some governance tokens deliberately avoid CEX listings as a positioning choice. The trade-off is real: less external review in exchange for ideological consistency.
In all three cases, DEX-only does not mean disqualified. It means the other four signals carry more weight than they would on a token with a Coinbase listing. The full pre-purchase sequence sits in how to check a token before buying.
Run the score on a token
Paste an ERC-20 contract address into stablehub.io/check/token. The Rug Risk Score returns the exchange count and the top-5 venue names alongside the LOW / MEDIUM / HIGH grade in 2–4 seconds.
Frequently asked questions
Is a token only on Uniswap automatically a scam?
What is the minimum number of exchange listings for a token to feel safe?
What does CoinGecko's Trust Score mean for an exchange listing?
Why does a Tier 1 exchange listing not guarantee a token is safe?
Does StableHub weight exchanges by tier?
Not financial advice. A Tier 1 listing is a floor, not a ceiling. Read the full disclaimer.