Quick answer
To check token liquidity before buying, look at three things in order: (1) 24-hour trading volume in USD — visible on CoinGecko, indicates how much actually changes hands; (2) the size of the primary DEX liquidity pool — visible on Uniswap, PancakeSwap, or via DEX Screener, indicates how large a sell you can execute without crashing the price; and (3) whether the liquidity is locked or burned — visible by checking who holds the LP (liquidity provider) tokens on Etherscan, indicates whether the developer can drain the pool at will. The three together define "rug-able liquidity": an unlocked pool below $100,000 where the LP tokens still sit in the deployer wallet is the highest-risk configuration. StableHub's Rug Risk Score v1 uses 24-hour volume from CoinGecko as a liquidity proxy and grades tokens with under $10 million in 24h volume as below the LOW-eligibility threshold. The v2 release adds direct pool inspection and lock-status checks. Run the contract through StableHub first; verify pool depth and lock status manually for any position over a few hundred dollars.
Not financial advice. StableHub tools are for informational purposes only. Deep liquidity is not a buy signal.
Why liquidity matters more than price
The displayed price of a token is not the price you get when you sell. The price you get is whatever the liquidity pool will absorb without slippage. A token displayed at $0.10 with $5,000 of liquidity will trade to you at $0.10 on a $50 buy and at maybe $0.04 on a $5,000 sell, because your sale will absorb most of the pool. The smaller the pool, the wider the gap between the displayed price and the executable price.
This matters for two reasons. First, thin liquidity is an exit trap: you can get in but you cannot get out at anything close to the price you saw. Second, thin unlocked liquidity is the structural precondition for a hard rug — the developer can drain the pool whenever they choose. The wider conceptual background sits in the pillar token safety guide; this page is the click-by-click version.
Layer 1 — 24-hour trading volume
Volume is the cheapest first read. Open CoinGecko, search the token, and look at the figure labelled "24h Trading Volume" on the right-hand summary panel. Read it against this threshold table:
| 24h volume | Liquidity reading | What it means in practice |
|---|---|---|
| < $10,000 | Functionally illiquid | Even a $500 sale will move the price visibly. Treat as untradeable. |
| $10,000–$100,000 | Thin | Exits possible only at small size with material slippage. |
| $100,000–$1,000,000 | Moderate | Beginner positions ($100–$1,000) tradeable with acceptable slippage. |
| $1,000,000–$10,000,000 | Healthy | Most retail positions clear without meaningful price impact. |
| > $10,000,000 | Deep | StableHub's Rug Risk Score threshold for LOW eligibility on the volume signal. |
Volume is reported across all venues where the token trades. A token with $2M in 24h volume split across five exchanges has different practical liquidity than one with $2M concentrated on a single Uniswap V2 pair. The next layer disentangles that.
Layer 2 — Primary pool depth
Volume tells you what changed hands. Pool depth tells you what is available to change hands right now. The two diverge on tokens where most reported volume is wash trading or where most volume happens on a CEX rather than the on-chain pool.
To check pool depth on Ethereum:
- Search the token on DEX Screener (
dexscreener.com) or open the token's CoinGecko page and click through to the Uniswap V2 / V3 pair from the Markets tab. - Find the row for the primary trading pair — usually the token paired with ETH, USDC, or USDT.
- Read the Liquidity column. This is the USD value of the paired assets in the pool.
The threshold you care about is roughly two to ten times the position size you intend to buy. A $500 position into a $5,000 pool will pay 5–10% slippage on entry and the same on exit. A $500 position into a $50,000 pool will pay under 1%. The Rug Risk Score's $10M-volume threshold for LOW eligibility is calibrated against the equivalent pool depth: most tokens with $10M+ daily volume have at least one pool above $1M.
Layer 3 — Lock status (the rug-able liquidity check)
This is the check that distinguishes "tradeable" from "drainable". A liquidity pool generates LP tokens — receipts that represent ownership of the pooled assets. Whoever holds the LP tokens can withdraw the pool. Three configurations exist:
| LP token location | What it means | Rug risk |
|---|---|---|
Burned (sent to 0x000...dead) |
Nobody can ever withdraw the pool. Liquidity is permanent. | Lowest |
| Held by a time-lock contract (Unicrypt, Team Finance) | Withdrawals blocked until a specified date. | Low until lock expires; check the unlock date |
| Held by the deployer wallet or a fresh wallet | The owner can drain the pool at any moment. | Highest. This is rug-able liquidity. |
To check on Etherscan:
- Open the Uniswap V2 pair address. DEX Screener shows it directly; on CoinGecko's Markets tab, click through to the pair page.
- Open the pair address on Etherscan:
etherscan.io/address/<pair address>. - Click the Holders tab. The list shows who owns the LP tokens.
- If the top holder is
0x000000000000000000000000000000000000deadwith 100% or near-100% of supply, the liquidity is burned. Lowest rug risk on this signal. - If the top holder is a labelled lock contract (Unicrypt, Team Finance, PinkLock), the liquidity is time-locked. Read the unlock date.
- If the top holder is an unlabelled wallet, that is the rug-able configuration. The same wallet appears as the deployer on the token contract's "Contract Creator" line.
How StableHub reads liquidity
v1 reads 24-hour trading volume from CoinGecko's /coins/ethereum/contract/{address} endpoint and applies it as a coarse liquidity proxy. Tokens below the $10M daily volume threshold cannot earn full credit on the volume signal; tokens at zero or near-zero volume contribute to a HIGH grade.
v1 does not directly inspect pool size or LP lock status. This is one of the six documented limitations on the Rug Risk Score methodology page. The v2 release adds direct pool inspection (using the Uniswap V2/V3 subgraph) and lock-status checks against the major lockers (Unicrypt, Team Finance, PinkLock, Mudra). Until v2 ships, the three layers above are a manual cross-check that takes under two minutes per token.
The StableHub Liquidity Triage Framework
StableHub Liquidity Triage Framework: A token's liquidity should be assessed across three layers, not one. Layer 1 reads 24-hour trading volume in USD from CoinGecko, with under $100,000 daily volume classified as thin, $100K–$1M as moderate, and over $10M as deep enough to qualify for the LOW grade on StableHub's Rug Risk Score volume signal. Layer 2 reads the primary DEX pool depth from DEX Screener or the Uniswap pair contract directly, with the pool ideally holding two to ten times the buyer's intended position size. Layer 3 reads LP token ownership on Etherscan to determine whether liquidity is burned, time-locked, or drainable by the deployer wallet. A token failing any layer should be treated as elevated risk; a token failing all three should be treated as a likely hard-rug candidate regardless of price action.
Worked example — the rug-able liquidity pattern
Consider the historical TurtleDex contract from StableHub's validation set. At the moment of its rug in March 2021, the token had: 24-hour volume above $5M from coordinated activity, a primary Uniswap pool of roughly $2.5M, and LP tokens held entirely by the deployer wallet. Layers 1 and 2 looked acceptable; Layer 3 failed completely. The deployer drained the pool in a single transaction. Any check of LP token ownership in the days before the exit would have shown the rug-able configuration directly.
This is the case the volume-only proxy in v1 cannot catch. It is the central reason Layer 3 is non-negotiable for any position size above a few hundred dollars.
What deep liquidity does not tell you
Deep liquidity rules out one specific failure mode — the inability to exit at price. It does not rule out:
- Honeypots. A honeypot contract can have any liquidity depth. The pool is irrelevant if the contract code blocks selling. See how to read smart contract red flags.
- Concentration risk. A wallet holding 40% of supply can crash a deep pool just as effectively as a shallow one. See the holder concentration check.
- Soft rugs. Liquidity that is healthy today can be drained gradually over weeks. Monthly re-checks matter for positions you hold.
Liquidity is one signal of five. The complete five-signal walkthrough is in the pre-purchase guide.
Run the score on a token
Paste any Ethereum ERC-20 contract address into StableHub's free checker. The Rug Risk Score returns in 2–4 seconds with the 24h volume reading baked in.
Frequently asked questions
What is a safe minimum liquidity for buying a crypto token?
What is "rug-able liquidity"?
How do I check if liquidity is locked or burned?
Does StableHub's Rug Risk Score check liquidity directly?
Can a token have high volume but still be illiquid?
Not financial advice. Deep liquidity is one signal of five. Read the full disclaimer.